Find local deck sanding experts near you

I need my 10.4x4m deck sanded and re oiled. There is a large step that will need to be done also. We did try to do it ourselves so the deck is in better condition than these photos. We just couldn’t get it looking professional.

Spotted gun deck new has intergrain ultra deck applied but it’s to orange need it sanded back to bare soma clear can be put on it Approx 25 metres

Need a deck sanded and oiled

Back deck needs sanding and lacquering. It is exposed to all elements. Looking for a quote please.

I approximately 40m2 of deck that need cleaning, light sanding and deck staining. There are 3 decks with the smallest only being 1x4m on the top level. They were stained 4 years ago using Wattyl Weatherguard (Merbai tint) so doesn't need to be overlay sanded as the stain paints over nicely. Must have your own sanding equipment and I will supply the paint / brushes etc.

Require small front porch, car port posts, letter box post and rear deck and posts sanding and stained .

We would like our balcony’s deck to be refreshed. Plus sanding and staining of 4posts (2 downstairs and 2 at the balcony)

Deck approx 10 metres by 6 metres needs sanding back to prepare for oiling

Would anyone be available to help me re-sand and stain a deck this week. Boards in very good condition. Just needing to prep to get my house rented asap. Deck is full covered. I’ll grab stain and anything needed (advice re: the best varnish/stain for the job would be welcome).

2 decks (front porch, courtyard) that need to be sanded back and nails punched. Deck 1 roughly 14sqm, deck 2 roughly 23 sqm. No staining required (left to naturally go grey). Just top of deck to be sanded (not face boards of house, or wooden steps leading up to house) Need this completed by Friday 31st of May

Hi, I have a small deck at our front entry (15.6m2) that I need sanded and oiled please. The timber is a nice colour, so the natural colour oil.

Need a deck to be sanded and deck oil applied I have added the side photos Total area of decking that needs to be oiled is 72 sq m with the top and sides as per photos . I’ll remove all pots . Few nails need to be hammered down less than 10

I’m in need of some help to sand a deck back to raw timber. I don’t need any oils or deck wash applied I just need the deck sanded. I’ve already started but I don’t physically have the time to complete the work. The deck size is ~9m x 5m

Needing our deck sanded, nails punched (some are slightly raised) and 2-3 coats of seal/product. Deck is 46m2 merbau.

Wanting to have our 2x10m timber deck sanded please ready to oil. If you do oiling 2 coats also that’s a bonus

Deck patchy due to render getting on deck and being pressure washed off. We need the deck completely sanded back. Deck size Long skinny piece approx - 6.5m x 1.1m Larger deck area approx - 4.5m x 5.1m

Sand deck and oil x2 coats. Approx 100m2 including stairs.

deck needs sanding and staining

2 areas that are 5.5m x 2 meter and one area 6.4m x 1.2 meters. Will pay for materials needed and extra boards that need replacing. Will need to discuss some details, willing to remove split boards and will need materials collected, thank you!

Deck and top of roller door to be sanded and stained Decking Stain onsite Deck: L: 4500 W: 2320 H: 370 Roller frame: L: 4100 H: 510 - Due date: Before Friday, 12 January 2024