Find experienced local carpenters in Brisbane

Five outdoor backstairs need replacing, a basic job. I can provide stringers and treads if needed.

BRISBANE AND SURROUNDING AREA NOTE: Budget varies depending on portability and material so feel free to send your own quotes. Hi, I’m looking for a furniture maker or welder to help design and create a sturdy furniture seat frame that will support the back pillows on this seating set. Please refer to the drawing for a rough idea (may need further support frame at back to hold it up). The general concept is to make this set freestanding so that it doesn’t need a wall to offer back support. It must be 190cm long, 70cm wide and 45cm high. The idea is to put the set on top of the frame and lean the back pillows against the back of the frame. I would prefer for it to be able to fold down the middle horizontally as well so it’s easier to carry. Vertically would also be helpful but not absolutely necessary - it just makes it more portable for me. If you can’t fold it vertically or horizontally, just let me know and still feel free to send a message. Material wise: aluminium or a light sturdy metal would be best. If you know any alternatives, feel free to suggest. If this sounds like a task you’d be up to, then please send me a message with a quote. I forgot to add that I’ll need 3 of these frames. Thanks!

Clothes rails in existing built in wardrobes are too deep. I want to bring them closer to the wardrobe doors (than back of the wardrobe) to fit adult size hangers. All materials are here, just need to measure for new positions, unscrew and rescrew in new positions. 5 rails in total.

Assembly of Absco Shed with sliding door 1.52W x 0.85D x 1.95H Purchased new from Bunnings

I would like someone to build an internal curved wall with an archway cut out inside of my hair salon - will be easiest for someone to come and view at location to understand the exact design and measurements etc - will need to be completed on a Sunday/Monday/Tuesday - over 3 days ideally Attached is a curved wall reference and, the archway that we'd hope to acheive somewhere within the wall

I have a cavity and wardrobe where the cupboard doors have been removed. I am looking to have cupboard doors out of chipboard made painted and installed. There are many cupboard within my house with the same diamensions. dimensions approx 2340 x 62 per door. Doors to be painted cream, colour matches and hard wear installed.

Event crew!!! Require someone for Chair cover install - experience a plus - $250

Need 110cm of wall removed plus bulkhead then frame up and line wall behind in preparation for new built in wardrobes

Small kitchen install about 10 cabinets, no drawers faces or doors just panels. On plastic feet fully assembled ready to install, detailed numbered plans will be available, I run my own cabinetry business and am seeking someone for future installs as well hopefully. Just need this one in place before friday for flooring to go down and im out of town. Job Queen st brisbane, parking will be available.

We have tried multiple cleaners in the past, who can’t seem to lift these particular stains from dog urine. Needing 3 large bedrooms steam cleaned, with heavy duty stain remover. Stain is from dog Urine. And a 4 seater lounge with chaise cleaned with heavy duty stain removal in one corner of the couch. The couch has been cleaned multiple times but can never lift the stain fully.

Raise the height of a storage box.

I have an acrylic panel - 90 x 60 x 5 - needs to be cut to make custom made shelving Have skillsaw, jigsaw and dremel but not brave enough to try doing myself!

Seeking to install some plastic sheeting to cover a balcony structure, 3.3m Length by 1.2m Width. Job is to source sheets, bolt on to aluminium structure as per photos. Corrugations to face outwards away from balcony. Job to include acquiring the sheets in correct size.

Tasks 1. Install floorboards 2. Install L-trim as required 3. Re-attach skirting boards Rooms a. Living room 16.8 sqm with sliding glass door on one side b. Master bedroom 15.1 sqm with sliding door built-in wardrobe c. Bedroom 10.8 sqm with sliding door built-in wardrobe d. Storage (MPR) 9.6 sqm with sliding door Floorboard materials (already purchased and delivered to the unit): a. 58.08 sqm (inclusive 10% spare) Hybrid SPC Fiesta 6mm b. L-trim 2.7m x 6 ea Quality requirement: Acoustic testing achieve lnTw of no more than 57. The floors leveled by professionals. Please provide an offer

My dog chewed on the trim around a cabinet in my rental including some of the wood itself. I’m looking for someone to fix this up for me. Photo of guilty dog for reference

Installation of 150mm feathered edge skirting with contact adhesive. Skirting and adhesive supplied. Room is 4900mmx4075mm. No need for cutting internal or external corners as skirting will sit flush when bent. There are 2 doors so skirting will need to be cut. Preferably this afternoon if possible.

Sanding n restain decking

We are after someone who can give our verandah and deck a light sand and couple of coats of stain. Approx 32m2 over 2 areas. See pic for dimensions and back deck area. Don’t have photos of veranda

Install tv box in bar foyer in Brisbane city. Parking available. May need to scribe to floor. Assistance with cabinet available. Need to have have tools and experience

Red wine was spilt on the carpet. It’s an old stain. Most of the colour has been removed, it’s just a light stain that needs to be to go.