Find experienced local carpenters in South West Sydney

It's a single garage. - Build frames to insulate garage wall. - Build door frames to replace the roll up garage doors by the bi-folding one and a sliding door. - Build a bid folding hampton style garage door.

Am purchasing a lifetime 2.1 by 2.1m pvc shed and would like it installed on a shed base of plastic pallets

The wrong timber was used by the previous owner and is deteriorating. The posts are fine just rails and pickets need replacing. I’ve attached a plan and the existing photos and example of what we are after.

gyprocking underneath the staircase, small section Bring own tools

I bought 2 wooden urns and can't find bigger ones. Cross fingers that if a square is cut into base of wooden box from inside and a channel cut into wooden lip the urn can slide in and backing put on and won't detect from outside.

Need outside oil stain to be removed and cleaned completely

1. I need the Gyprock edges of the cavity repaired with a smooth finish - no open edges 2. I need to increase the height of the fireplace cavity by 7mm and levelled 3. I also need an access panel installed on the side of the wall Inside the cavity is steel studs I already have the required paint

The sliding doors all need to be replaced and the draws in a 2 bedroom apartment. Both built in robes have been damaged

In need of a carpenter to built me a floating box to put my wall mount heater in. all is required is timber and villaboard ill do tiling.

Price is for labour.Need to align with rest of the patio. Material cost will be paid separately as per receipt.Tasker to buy the sheets and brakets. See pictures.

Require a kitchen cabinet maker to assist with cupboard above our fridge area, fridge slight too high so it wont fit in the area as required - unsure if existing can be slightly cut down to allow it to fit or maybe bottom shelf removed and doors filed down image attached your quote would be appreciated thanks

Build Absco Bike Shed (2.26MW X 0.78MD X 1.31MH) Brand new in box. Build the shed inside apartment garage complex. Drilling into ground not required, assembly only https://abscosheds.com.au/garden-sheds/bikeshed/bike-shed-2-26mh-x-0-78mh-x-1-31mh-colorbond/

Outdoor storage shed installation on a concreted surface. Brand: Lifetime Side Entry Outdoor Storage Shed purchased from Costco Australia Dimensions: 2.4m x 3m For more info, you may refer to product page https://www.costco.com.au/Patio-Lawn-Garden/Sheds-Storage/Lifetime-Side-Entry-Outdoor-Storage-Shed/p/1902292

Need this 5 tier shelf built from bunnings

Help build a small narrow shed measuring 1.5 x 0.78. Shed is to be built against the brick wall of the house. It must be assembled and anchored into the brick wall and ground. Link below is the shed you will be building. https://easyshed.com.au/products/narrow-slider-garden-shed-1-5m-w-x-0-78m-d-classic?syclid=b2656099-e68b-4e70-9452-854f472b401b&utm_campaign=order-confirmation-email&utm_content=product&utm_medium=email&utm_source=OrderlyEmails

Open the box not even halfway need someone to finish off

Need a handy person to fix or replace 2 doors for cupboards. It doesn’t close due to tiler tiling the skirting and forcing doors inwards - Due date: Needs to be done on Tuesday, 6 February 2024

Need a couple of shelves made m. Something similar to the photo - Due date: Flexible

Build an easy shed on concrete slab. 3mx1.5mx2.27m. Concrete fixing 8pk included - Due date: Flexible

Kitchen cabinet drawer repair required as it is not closing on its own due to damage caused. All mechanisms and parts still in place, drawer is not closing smoothly on its own as previously. - Due date: Needs to be done on Monday, 15 January 2024