Find experienced local fencing contractors in West Brisbane

Surveyor or geodetic engineer

White aluminum horizontal slat fence with pedestrian gate and electric driveway gate approx 30m. Supply & installation

Need aluminium slat fencing installed. Fencing will be attached to retaining wall brackets. Will need a solution for the end of the fence - it may need an extra long post (ground drops away). We have purchased 3 sets of 2.5m x 1.8 m.

Looking for a Chicken wire fence installer with posts and a gate. Total area roughly up to 20 meters. Will provide all the material. You will have to bring your own tools.

My pool fence and gate went in less than a year ago and doesn't self-latch - it's slightly misaligned. I need someone who knows there way around these gates to come and adjust it so that it swings shut - currently, you need to give it a little push, which isn't up to code.

Mark border for new fence

A fence (chicken mesh and posts) needs to be installed with a gate, material will be supplied. Happy for recommendations.

Looking for an experienced Brushwood fencer to replace capping on 110 metres. Must have previous experience and reference locations we can check the quality of work before proceeding.

Please quote for a basic timber fence. 1800mm Tall. 25 metres in length on flat ground. Previous fence will need to be removed and discarded.

During a demolition and tree stump removal the roots of a tree run under this colourbond fence dislodging a post. I’m advised it mainly needs dismantle two panels, digging out the post and some soil/Stone on the other side of the fence. Reposting the post back a some additional concert and tidy up neighbours side. I’m advised the panels aren’t damaged. Around 3hrs work.

Existing 1m high timber retaining wall that is approximately 2.5m from fence line. Design and construction of suitable timber gate to enclose for chicken pen. Height is to be 6 foot to match the existing timber fence.

Got a corroded steel post as shown in photo. I need to have a new post fabricated out of galvanised box, prop it and change it out. Current post is 9x9xcm (square section) and height is 42.5cm between base on top plates... see photo

Fencing repairs install and posts Area 1: remove existing palings and replace with approx 110 new palings 95x170 (palings only will be provided) Area 2: install 1 new post (provided) to support existing fence Area 3: install 2 new posts (provided) to support existing fence Area 4: nail any loose palings. Must have insurance and ABN.

Install a net to stop tennis balls from going over the boundary wall. The existing net is too low. Ideally id like the net to be 5 metres high. The length of the wall is 16 metres.

Install a self closing wooden gate and fence panels on both sides of the house. Minimum height of gate has to be 1.2m as it will form a part of the swimming pool fencing. Width of left side of house -1.8metres Width on right side of house -2.8metres This is for labour quote only. Happy to reimburse any cost for gates and any other materials required

I am looking for a handyman to finish colorbond fence and gates. Work: - Put two gates, their locks, hinges, rockbolt posts. - 7panels rake, cut and fit. - fit a post (rockbolt, channels and 8 straight panels. Please price me for an hour and estimate of hours it would take in comments My handyman planned to finish this before moving to WA but not all parts arrived on time! Someone with some of their own tools, but more importantly knowing what they are doing and experienced. I have many tools and have all the supplies. Experience with working with steel cutting sheets, drilling posts, and preferably roofing experience. If works out with fencing, I have other work that I would like to finish in the next 3-4 weeks, : putting a patio cover an area of 18m by 2m, painting touch ups inside and outside, connecting a sail shade, …

I need 2x3m pool fence panels, one 970cm gate and some brackets collected from oxworks richlands and delivered to Mount Ommaney. All items are already paid for.

Gate #1 - wooden gate, needs reset/lifting as it scrapes on bottom. Latch re-attach. See photo Gate #2 - source and attach new fixing so it closes. See photo Make offer

Single fence panel needs to be sourced and installed please to match existing fence style and colour Approx 3m x 1.8m. You will need to measure. - Due date: Flexible

Need someone to build a 12 metre long fence at the front of my house. It will be 2.4 metres high. There will need to be a 2 swing gate that will need to be at least 2m long each. The fence will need to look like the photo that is circled in red. The original fence guy that started it is not able to complete it. He suggested it is a 1-2 day job max. Looking for someone who has put up a fence before, I need someone with experience and who is confident that they can do a good job. If someone could start tomorrow that would be great. All material's would be paid by myself. - Due date: Needs to be done on Wednesday, 20 December 2023