Find experienced local carpenters in Mornington Peninsula

5 days from Thursday 30th.

Put together Absco 3.00 x 2.06m Double Door Garden Shed. Cement slab already in place. Needs to be secured to slab. Either Monday 27 May or Tuesday 28 May

Need someone to cut a new bit of skirting board and finish it properly. Wife is not happy with the finish We have the skirting board here but you’ll need to cut it and fit it and finish it. Wife has high standards :)

I have an outdoor wooden staircase and two of the runners need replacing. I would like the installer to source and install the new runners.

Sand and stain floor in kitchen/living/dining space

We have an old shed frame in the backyard that is being used as a chicken run. On one part of the roof is laserlite/polycarbonate roofing and the other side is just shade cloth. Would like to replace the shade cloth with laserlite/polycarbonate. We haven’t purchased any materials yet but will do so if you can tell us what is needed. Also happy for you to supply them if it works for you. If you have access to second hand materials, even better! As it’s a chook run we are not seeking anything fancy or good looking. Just practical and something to help keep the chooks run dry during the wet weather. The space you will be working with is approx 3.5m x 3.5m. We will be around to assist with the job if needed. You will need to bring your own tools / ladder etc.

Purchased a second hand Meridian wood heater and require insulation in outside covered entertaining area

Clean Merbou decking and add 2 coats of decking stain. All materials supplied.

Cut down x1 laminate desk bench top, 10cm from each side (reducing to 1600) *the end butts up to a brick wall that needs to be cut *must have suitable saw, happy to cover the cost for a new blade if required *I can provide anything else required *Yes, I’m aware laminate can chip, desks are temporary until we can confirm ideal length and width layout before ordering custom desks.

Need a handy man to do some smaller jobs around the house first then if happy with work considering getting a patio as well. More in the budget if happy all is good moving forward. Won’t be a full days work obviously dependant on experience especially with barn doors would be preferred. Door and track supplied need some more supplies such as shelf, board for door track and wardrobe locks. Will need help to pick up extra supplies in local Bunnings. 1. Firstly need a barn door put up. 2. Need an extra shelf in wardrobe 3. Put a few locks in wardrobe sliding doors in one bedroom. 4. Cut a hole in wall under staircase for storage and put a door. 5. Next stage Patio build ???

Our existing plaster roof is sagging and it's started to break apart at the seams. As per images. We want to either repair the existing or replace it. The shape is a little bit odd and dimensions in the images

All of the panels have been assembled we just need the shed put together and screwed It's this shed https://easyshed.com.au/products/gable-roof-garden-shed-3m-w-x-1-5m-d-classic Except the door is at either end instead of the front

We need the front of our house sanded back, stained back to the original colour and sealed. It is sun damaged, we get full sun during the day.

My husband built our 2.4 x 3 shed but didnt read the instructions properly. Will need the shed re-built. Instructions and all parts included

I have an old metal cabinet approx 1500 high, 450 deep and 600m wide to be removed from my shed and taken away. I've tried myself but can't budge it, as I think a wooden shelf is glued to the top of it, and I'm not strong enough to budge it.

Supply & install.... Two aluminium framed sliding flyscreen doors. Cream frames. (Door 1 below may need middle reinforcement) My budget offer is guesswork. ( Probably need a proper quote before going ahead with task) Door 1: 218cms X 120cms. Door 2: 218cms X 72cms. Window size: 97cms X 61cms. Cream frame.

Cabot's stain supplied. Approx 24 square metres of prestained merbau. Basically two rectangular areas.

I need assistance from a carpenter to join two benches together, biscuit cutting, gluing, clamping and finishing. Both panels are 2200mm X 600mm X 26mm thick.

I need a ramp so my little senior dog doesn’t need to climb the 3 stairs featured in the pic , no perfect stain match needed just close enough Will need to be long enough to keep it a smooth incline for her . She’s had a rough couple of weeks hence I’m not delaying time wise I will pay materials from bunnings you need your own tools please . Thanks - Due date: Before Wednesday, January 3, 2024

Hi team Looking for a professional handyman to assist with install of: 2x Hitch wall shelves (from blu dot) wall 5 x cabinet handles for new joinery unit The wall shelves require affixing to wall but have own legs to support it on floor - so should be straight forward. 5 x Handles to be installed into brand new custom joinery unit Pics attached of type of shelves & handles to be installed Need completed on Monday 12pm onwards if possible Thanks - Due date: Needs to be done on Monday, 18 December 2023