Find experienced local carpenters in Outer East Melbourne

Assembly of an easy shed - garden shed 1.5m x 1.5m

Professionally cut and install bunnings acrylic splashback to small upstairs kitchen. This product https://www.bunnings.com.au/bellessi-725-x-2440-x-6mm-manhattan-night-motiv-polymer-splashback_p2667877 needs to be professionally and correctly cut to fit a corner return and a microwave bench space. Own tools needed but driveway space available to park and set up. Corner return approx 60 cm high , 2 faces 60cm, 70cm. Microwave space approx 64cm high 63 cm wide. Sheet is higher than space so will need to be cut down.

Replace old decking slats x10 . Re oil and repaint

To enlarge the width of the slot for refrigerator. Currently slot is 1790mm x810mm Fridge 1780mm x 850mm

3walls to fit 2 doors and window

I’ve got an Easy Shed 3x3 shed that I need assembly to be finished. I’ve assembled the rear wall, 2 side walls and 2 roof panels. So all that’s remaining is the front panel and doors assembly (Swinging, not sliding). The the parts needs to be screwed together and secure the shed in place to the concrete slab (already poured). All parts are supplied with the kid and the instructions are easy to follow, but I’ve hurt my back and can’t finish it. It will require 2 people to handle the panels. Any questions, feel free to ask!

Floor area: 85sqm - Flooring is glued and screwed down - Metal joists - Install, supply including glues and screws red tongue - Will provide labourer to move materials

UPDATE - both stringers will need replacement. Please confirm your offers. Thx Require replacement (supply and install) of the following for outdoor stairs: *One stringer - the stringer attached to the wall can remain as it's solid, just need to replace the other one. *6 steps approx 1m wide (only treads, no need for risers) The stringer can be attached to the base of the existing post, which is solid. Use treated pine wood for new stairs. Remove old stairs, no need to dispose as I will place in hard-waste collection.

Not sure how much it will cost... One side of the wall of the garage is cement sheeting fixed on timber frames. The base timber plank which lies flat on the concrete floor is rotten. The bottom edge of the cement sheeting is supposed to be fixed on this base plank, but, because the plank is rotten, the bottom edge is not fixed. So the storm blew part of the sheet away. You need to do 1. Replace the rotten timber plank lying on the concrete floor. You can tell me the dimensions of the plank and I can buy it for you. 2. Replace the cement sheeting with Fiber Cement Board.

I need a cabinet built and installed in the space above my fridge. There was previously one there but it was removed as the fridge didn’t fit. Need to fill all space and cover hole. Does not require doors. Would like it to be white (rest of kitchen will eventually be painted) Measurements are 80cm width, 61cm depth , height 42cm

Need a carpenter to take apart the piece circled and install back later after 30mins in order to pass pool safety.

Build Absco ‘Premier’ shed in Silvan. Hey guys. Need some help as I’m swamped setting up a new property for my family in Silvan. Looking for someone to build the Absco ‘Premier’ 3.00mW x 2.26mD x 2.00mH shed I had delivered from bunnings recently. I have already put down a crushed rock / gravel base (unfortunately concrete isn’t an option here). Flexible on day and time within reason. Easy access to the site. Thanks in advance!

2 x pull out drawers need their fronts fixed back on. Picture shows 1 of 2 that are exactly the same, except they are both right off now. You will need some dowell and cabinet fixings I would imagine. We have guests for dinner arriving at 6pm so must be done and dusted by then. I can't do it myself because I am committed to other projects already until 5.30pm.

Quote to build maurbu deck in my backyard

I am looking for someone to sand and either oil or stain the deck (depending on the quality of the wood after sanding). The deck is around 4.3x4.3m. Please see pics. I will provide the deck oil or the timber stain. You should have the tools! Please see photos... It's pretty straightforward! Thanks! Ideally has to be done in the next 5 days...

Install IKEA bench top over existing metal angles. Existing bench will be removed the day prior

We purchased a 3m x 3m EasyShed and have assembled most of the panels. Still needing the front panel and doors put together as then the whole shed erected. We’d be very grateful for someone to finish this for us. Open to negotiations.

Our wooden side gate is beautiful and we'd like to retain it but it's heavy and has trouble closing properly. It catches on the wall so doesn't close properly. Creative solutions welcome.

Need cupboards installed in a European laundry by a qualified carpenter - Due date: Flexible

We have an existing kitchen cabinet setup. Need to remove one cabinet so that our fridge can be set up - Due date: Flexible