Find a professional gate installation in South Brisbane

I need to build up front block wall with vertical aluminium panel and sliding gate on the driveway. The task includes concrete footing, block wall, concrete corefill, render, paint and one pedestrian gate with vertical aluminium panel Height: 1.6m high Block wall colour: TBC Aluminium colour: TBC Front: 10m Also supply and install sliding gate with vertical aluminium panel including fabrication, welding, powder coat and installation, electrician and remote controls Sliding gate slide inside of wall

Need someone to install an adjustable gate (1.00M x 1.78M). Scope of works: - Build the adjustable metal gate and install it (see photo). I have the screws etc. It's adjustable so the metal doesn't need to be cut to size. - Drill in 8 metal eyelets (see photo) as I need these to thread through some metal rope (as I'm adding cat netting). - Install gate latch. I have the screws etc. See link: https://www.amazon.com.au/gp/aw/d/B08RYMYH6T?psc=1&ref=ppx_pop_mob_b_asin_title Please review all the photos as it has the installation instructions and other important images. When quoting, please let me know if you have experience doing similar jobs and what time/day you can do.

We would like to have a quote for installing front electrical gate which match our fence. Thank you.

Cutting off small section of colourbond paling gate.

Cut off bottom of colourbond palings on gate

The concrete post will need to be moved away, reversed into by amateur student driver

1. Reattach bolts connecting motor to gate in automatic driveway gates 2.Attach bolts to side gate

The metal base for our gate has been damaged and it is bent pretty badly! Open to full replacement.

Gate was forced open and now will only close but must open manually. Seems the teeth have been worn so no longer latching.

House gate rubs against the concrete and stops, need conrete grinding for about 1 foot length and about 10 mm. Skilled person required.

Hi need someone to build a gate for the side access. Total width is around 2.5 meters. I can provide the materials.

Side fence gate needs to fixed

The anchoring bolt of the side garden gate attached to the wall is loose. The garden gate is now half detached from the exterior wall of the property once the gate is opened. Require someone to anchor and seal the gate back properly to the exterior wall. Need a proper permanent fix. Also note the bottom of the gate there is a hole drilled into the gate, allowing the bolt to penetrate deeper into the wall (see photos, highlighted in red circle). The middle, and top of the gate had no holes on the frames of the gate, so the bolts from the middle and top of the gate does not penetrate into the wall.

We have a side gate that our dog escaped under. We need someone to build or attach something to the bottom to prevent this from happening. It will need to be opened and closed so bins can be taken out etc so functionality of the gate needs to remain. Let me know thoughts and offers!

Sliding gate does not open this morning. Motor have sound.

I have a couple of Iron house numbers to attach to the front gate.

My house recently was broken into. The thieves climbed over this small side gate to gain access into the property. I want to replace the current gate with something taller, sturdier, and difficult to climb over. The approximate dimesion of the current gate is 1.6m x 0.8m - Due date: Before Saturday, 9 March 2024

Get up on tile roof and find where the leak is coming from and seal I have spare roof tiles - Due date: Needs to be done on Monday, 29 January 2024

Please quote to remove this fence and take away all materials, posts and wires. Including loose bricks and broken concrete. - Due date: Flexible

Since moving in my side gate has always been tight to close. Since the rain lately it’s so bad that I can’t close it at all. See pictures. Wooden post might need straightening or sanding down. - Due date: Before Monday, 15 January 2024