Find experienced local fencing contractors in Melbourne

Need painted the side fence 12.0 x 2.0 mt with built in lattice (paint both sides) Rear fence 5.0 x 2.0 mt with built in lattice (paint only one side) I will supply the paint.

Replace timber fence palings, base pieces and horizontal bracing for 8.6m of straight boundary. Posts are serviceable and can be reused. Please quote for installation and materials

I have a side gate that needs repairing ASAP - either sanding back the parts of the areas my dog has damaged or replacing the timber panels! I'm happy to paint afterwards if you prefer also!

I would like to construct a new brick front fence. 6m long 2m hight. Demolish existing 600mm brick fence. With cast in steed gate detail. Similar to photo shown.

I need someone to supply and place 2.0 meters of Ocean blue colour bond fencing. Site will be prepared. Posts and CB fencing will need to be supplied and installed with associated attachments. It’s only 2.0 meters to join a new roller.

I need (5) 1100x6000mm wire fencing panels brought from Toolern Vale to Collingwood. They are very light and only 5 of them, just very long.

50.00 per hour Require a QUALIFIED & EXPERIENCED carpenter to repair existing timber fence and timber on gate (which are on a steel frame) and replace with new 42x18 design pine horizontal timber slats - like for like. Price to include removal of all old timber, supply and install of new design pine timber and then for the lot to be painted black. Fence is approx. 3000x 1800mm, gate about 1000 x 1800. Thanks

Need inspection and certificate of pool fence for council compliance. Needs to be conducted by a building surveyor or building inspector or pool inspector.

Needing to rebuild the frame of or front fence. New posts and joists required pairings in reasonable condition

We need our glass pool gate repaired as the latch doesn’t close and the glass fence needs to be straightened

I need a boiler maker/welder with experience in metal fencing to install 2 fence panels and a pedestrian gate at the front of the house. Work includes some welding, bracket fixation into metal with screws and metal that needs to be cut/trimmed. 1. Pedestrian gate – 2 sets of hinges to be screwed into the metal post (picture 1). Strike bar to be screwed into the opposite metal post with one part of the metal that requires trimming and a hole created for the gate latch bolt (picture 2). 2. Fence panels (2 panels) to be installed. The fence panel brackets will need to be screwed into the posts (4 brackets). The fence panels are slight wider and require trimming of the overhangs (horizontal bars) prior to attaching to the fence panel brackets. Both panels are attached to the larger post on each side. The other side of these panels are to be joined to the intermediate (smaller) post in the middle. This will require welding (picture 3). 3. The skirting of the posts (3 sets) will need to be welded on the foot of each post (please see picture). There is rear access for parking. There is no parking at the front of the house. Preferable this Saturday (04/05/24) or Sunday (05/05/2024).

We would like to get help building a 3x5x1.2m fence + swing gate around a new hot tub that we are getting delivered tomorrow. We have lots of wood already on hand from fences and decking that we removed a few months ago. We would love to also build a frame above the fence to trellis vines, but that's optional.

The fence needs to be fixed. 250 meters wide

My small front gate no longer closes as the post it sits on has moved over time. I need this fixed with one important condition - you cannot damage the creeping fig growing on the post because this creeper covers the adjoining fence and it must be protected.

Electric driveway gates. One gate has dropped and is leaving gap, refer photos. Might need to be re-hung. Quotes welcome!

Rear gate needs to be rebolted into back wall/ fence to secure

I need someone to purchase a lattice fence topper and a cat roller barrier from Bunnings (I will provide details) and attach them to the metal back fence in my courtyard. The job also involves cutting down a couple of small tree branches and repositioning a small post. - Due date: Before Monday, 5 February 2024

I need to install a wire mesh over the vines growing on the fence alongside my pool. I will provide the wire mesh, however tools and screws will be required to secure the mesh to the existing fence Please see photos attached, the paving area next to the fence is quiet narrow but can be stood on - Due date: Before Tuesday, 23 January 2024

Poles and wires for high wire trellis on top of fence to support vine - Due date: Before Sunday, 31 December 2023

Looking for someone to repair the gaps in my back fence and put in a temporary/removable solution to stop a dog from getting under the gate - Due date: Needs to be done on Wednesday, 20 December 2023